Multiaxial material testing machine Zwick Z050 with optical strain measurement ARAMIS 5M

Multiaxial material testing machine Zwick Z050 with optical strain measurement ARAMIS 5M

Material testing machine for testing bonds with structural adhesives
© Fraunhofer IWS Dresden

Material testing machine for testing bonds with structural adhesives

Mechanische Prüfung bei definierter Temperatur und Luftfeuchtigkeit
© Fraunhofer IWS Dresden

Mechanische Prüfung bei definierter Temperatur und Luftfeuchtigkeit

Producer

  • Zwick GmbH & Co, Ulm

Technical data

  • max. testing load (tensile and compression direction): 50 kN
  • max. torque: 200 Nm
  • load sensors: 100 N, 2,5 kN, 20 kN und 50 kN
  • torque sensor: 200 Nm
  • traverse speed up to 600 mm/min
  • angular speed up to 12 °/s
  • displacement sensor WAC
  • optical 3D strain measurement system
  • climate chamber (-40 °C to +180 °C; 20 % to 95 % rH)
  • temperature chamber (-70 °C to +250 °C)

Applications

  • mechanical determination of material properties
  • mechanical characterisation of adhesively bonded joints
  • structural component testing
  • determination of temperature and moisture effects

Examples

  • tensile test DIN EN ISO 527
  • tensile lap-shear test DIN EN 1465 or DIN 14869-2
  • compression test DIN EN 604
  • compression shear test Delo Norm 5
  • bending tests DIN EN ISO 178 und DIN EN ISO 14125
  • shear test DIN EN 14869-1
  • relaxation and creep experiments
  • various peel tests
  • various tests according ETAG standards

Optical strain measurement ARAMIS 5M

Optical strain measurement ARAMIS 5M
© Fraunhofer IWS Dresden

Optical strain measurement ARAMIS 5M

Major strain while performing a stretch forming experiment for strengthening a steel alloy
© Fraunhofer IWS Dresden

Major strain while performing a stretch forming experiment for strengthening a steel alloy

Producer

  • GOM - Gesellschaft für Optische Messtechnik GmbH

Technical data

  • non-contact 3D deformation measurement using grayscale analysis
  • usage in multiple magnitudes
  • 5 megapixel camera
  • frame rate up to 15 Hz (28 Hz in 2x2-binning-mode)
  • camera carrier and various calibration tools

Applications

  • non-contact 3D-deformation analysis
  • reverse engineering